The LiViliti Health Paptizer 360 is an FDA 510(k)-cleared microbial reduction device designed to add an extra step to your regular CPAP mask cleaning routine. The device cleans one mask cushion at a time and uses UVC light rather than ozone or chemical cleaning agents.
After you wash and dry your mask cushion according to the manufacturer’s instructions, the Paptizer 360 uses an array of 40 UVC LEDs to provide a 30-minute processing cycle, with in vitro testing demonstrating a 99% reduction in several types of bacteria commonly found on CPAP equipment.
Key Benefits
Proven bacterial reduction: In vitro testing found a 99% reduction in several types of bacteria commonly found on CPAP equipment after a complete 30-minute cycle.
UVC technology without ozone: An array of 40 UVC LEDs provides microbial reduction without using an ozone-based process, which can be hazardous.
Simple 30-minute operation: Place a clean, dry mask cushion inside, and start the cycle. Once complete, there's nothing to rinse or wipe off before using the mask.
Built-in safety feature: If the lid is opened during operation, the UVC LEDs automatically shut off to help prevent exposure to the eyes or skin.
Care
The Paptizer 360 requires minimal maintenance. To keep the device clean and functioning properly:
Wipe away debris from inside the device using a clean, dry microfiber cloth or paper towel.
Keep the Paptizer 360 away from liquids and do not expose the device to water.
Keep the device out of reach of children and never expose your eyes or skin directly to the UVC lights.
Shipping & Returns
For all orders in the U.S., shipping is $7.99 for orders under $50.00.
For U.S. orders of $50.00 and above, shipping is free.
Shipping cutoff times apply only to orders that do not require a prescription. Orders requiring a prescription may be delayed, even if placed before the cutoff, unless a valid prescription is already on file.
Please note: Offer for free standard shipping is only valid in the continental United States which excludes Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, and APO addresses. These states and territories will be subject to an additional shipping fee.
Expedited Shipping
Orders under $50.00:2-day shipping - $19.99Overnight shipping - $29.99
Orders over $50.00:2-day shipping - $29.99Overnight shipping - $49.99
Order must be placed and with approved prescription (if applicable) before 10 am EST to ship same-day. Excludes Sat/Sun delivery.
Expedited shipping is not available:
To Alaska, Hawaii, PO boxes and some rural areas.
During excluded holidays
On orders containing furniture items
APO addresses
In the event of a carrier indicating successful delivery of a shipment and a customer reporting that the shipment was not received, the customer will be responsible for opening a dispute or inquiry with the carrier.
Please note that your order may ship in multiple packages.
CPAP users who want additional bacterial reduction for their CPAP mask cushion
CPAP users who want a more thorough — but simple — cleaning routine
Who It’s Not Ideal For
People looking for a replacement for regular CPAP cleaning
People looking to clean CPAP tubing, headgear, or other components
How It Works
The Paptizer 360 uses 40 UVC LEDs with a wavelength of 260 to 280 nanometers to expose the surface of a CPAP mask cushion to ultraviolet light. This process is designed to reduce bacterial populations without using ozone or chemical cleaning agents.
In vitro testing resulted in a 99% reduction in several bacteria commonly found on CPAP equipment after a complete 30-minute cycle, including Staphylococcus aureus, E. coli, and Pseudomonas aeruginosa.
How to Use It
Wash your CPAP mask cushion, then allow it to dry completely. Remove the headgear, frame, and tubing.
Place one mask cushion face-up in the center of the quartz glass tray.
Close the lid and press the ON button, followed by the START button.
Let the full cycle run. The LCD display counts down the remaining time, and the unit automatically shuts off when the cycle is complete.
Remove your mask cushion. No additional rinsing or wiping is required before use.
Videos
Frequently asked questions
Does the Paptizer 360 replace regular CPAP cleaning?
No, the Paptizer 360 is designed to supplement, not replace, regular CPAP mask cleaning. Wash and dry your mask cushion according to the manufacturer’s instructions before placing it in the Paptizer 360 for bacterial reduction.
What CPAP equipment can I use with the Paptizer 360?
The Paptizer 360 is intended for certain compatible CPAP mask cushions and processes one cushion at a time. Headgear, frames, and tubing should be removed before use. The manufacturer’s testing was performed using ResMed AirFit F20 mask cushions.
Does the Paptizer 360 use ozone?
No, the Paptizer 360 uses UVC LED light rather than ozone to reduce bacteria on CPAP mask cushions. Its array of 40 UVC LEDs operates at wavelengths between 260 and 280 nanometers.
How effective is the Paptizer 360 at reducing bacteria?
In vitro testing demonstrated a 99% reduction in several types of bacteria commonly found on CPAP equipment. These included Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, E. coli, and Streptococcus pyogenes.
However, these are lab results, and the manufacturer notes that a correlation between the in vitro results and clinical outcomes hasn’t been established.
Is the Paptizer 360 FDA cleared?
Yes, the Paptizer 360 is an FDA 510(k)-cleared Class II UVC LED microbial reduction device intended as an adjunct for reducing bacterial populations on certain compatible CPAP mask cushions after cleaning.
Do I need to replace the UVC LEDs?
The Paptizer 360’s 40 UVC LEDs are rated for up to 10,000 hours of use, and there are no lamps or filters that require routine replacement. The manufacturer lists a five-year service life for the device and recommends discontinuing use after that point.